Inspection port.

7-10-02-03. Inspection port. An inspection port of at least four inches [101.6 millimeters] in diameter must be provided to check for malfunctioning of all antisiphon devices. The inspection port can be combined with a mounting of vacuum relief. If an airgap is used, as required by subsection 4 of section 7-10-02-02, the system is exempt from the requirement of an inspection port. History: Effective October 1, 1988. General Authority: NDCC 4.1-35-03 Law Implemented: NDCC 4.1-35-02, 4.1-35-03